Packet Tracer 2.1.1.5 Ping Request could not find host. cisco.com

[KolawoleAlli2491]

I've attempted to complete this twice now and I get the same result that it is unable to find host cisco.com. I even backtracked my steps and thought I put in wrong numbers or missed a crucial misspelling...

[Georg Pauwen]

Your project has several networks. What exactly can you not reach, from where ? Also, the configurations are locked. Post a zipped .pkt file where the devices can be accessed.

[haniakhann0054733]

i have the same problem, can someone help?

[Georg Pauwen]

Hello,

the only issue was a wrong cable between the wirless router and the cable modem, this needs to be a cross cable.

Attached the working file (saved in version 7.3.1).

[KVK]

I also have the same problem.

[amartinesei]

i have the same problem. I don't get it. I followed all the steps, for 10 times I guess. when i ping cisco.srv, I get this message 

"Ping request could not find host cisco.srv. Please check the name and try again."

[Mpr1]

Buenas, el problema viene del propio documento ya que tiene un error

En los DNS del servidor de Cisco, cuando tienes que poner Cisco.com y el DNS 208.67.220.220, el error viene de esa dirección, ya que tienes que poner la del servidor de cisco 208.67.220.1. Por eso al poner ping cisco.com no te pilla pero si haces ping 192.168.220.1 si.

Si aún así no te lo pilla, conecta el cable que va del ruter al moden por cable a través de internet y no a través de ethernet.

De nada

[JakubGGA]

Hi,
can you please help me find and fix an error

So, with my problem, probably the case was, i did not change (Interface) "Provider network" for "Cable" in Ethernet6, but i have chage it in "FastEthernet8" and because of that I could not choose in CONNECTIOSN>Cable the Ethernet6,It has resolved the problem with ping cisco.com

[4MB]

I also can't get it right. Can anyone help please?

[4MB]

Nevermind, I got it to work.

[Ali_04!]

Im having the same problem can somebody help me out

[Georg Pauwen]

Hello,

your wireless router is dishing out the wrong DNS server address, it needs to be 206 instead of 208.

[anshvikalp511]

Hey,

I have the same problem in the activity also I tried to change the DNS Server IP address to 208.67.220.220 but even after it is not working. Please help!

[Vnax]

I can't seem to ping to pc from pc even though I've added the ip addresses of all pc's in the dns server.

[Conrado93]

Hey. I also have this stupid problem. Please: help, it makes me crazy. I was starting create this topology a few times from zero, i was checking DNS in wireless router, server, cloud, but still: nothing and it is impossible to find solving this problem i google... I believe in common we solve this fault.

[Georg Pauwen]

Hello,

what is the problem ?