Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
3568
Views
5
Helpful
4
Replies

packet tracer activity

Go to solution
fezzpmnt
Level 1
Level 1

‎12-13-2021 06:36 PM

please help me with commands for configuring on the attached document.

please help i need to finish this in about 1,5hrs from now. your help will be highly appreciated

 

Labels:
Preview file
64 KB
0 Helpful
1 Accepted Solution

Accepted Solutions

Go to solution
Deepak Kumar
VIP Alumni
VIP Alumni

‎12-13-2021 10:24 PM

How can I help you with it? are you looking for configuration? share your pt file as well.

Regards,
Deepak Kumar,
Don't forget to vote and accept the solution if this comment will help you!

View solution in original post

4 Replies 4

Go to solution
Deepak Kumar
VIP Alumni
VIP Alumni

‎12-13-2021 10:24 PM

How can I help you with it? are you looking for configuration? share your pt file as well.

Regards,
Deepak Kumar,
Don't forget to vote and accept the solution if this comment will help you!

Go to solution
fezzpmnt
Level 1
Level 1
In response to Deepak Kumar

‎12-13-2021 10:39 PM

your help will be highly appreciated

pkt activity.zip
0 Helpful

Go to solution
Georg Pauwen
VIP
VIP
In response to fezzpmnt

‎12-14-2021 12:41 AM

Hello,

 

I was working on your project, but I saw that the issue has already been resolved. 

 

Either way, since I worked on it, I might as well post the revised project file. I have established end to end connectivity. The file has been saved in the latest Packet Tracer version, version 8.1, so that is the one you need to have installed in order to open the file.

pkt activity_REV.zip
0 Helpful

Go to solution
Georg Pauwen
VIP
VIP
In response to Georg Pauwen

‎12-14-2021 04:39 AM

Hello,

 

just in case you cannot open the file, here are the configs in text format:

 

RA#sh run
Building configuration...

Current configuration : 1803 bytes
!
version 15.1
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname RA
!
ip cef
no ipv6 cef
!
license udi pid CISCO2911/K9 sn FTX1524MPU8-
!
spanning-tree mode pvst
!
interface GigabitEthernet0/0
ip address 209.165.200.18 255.255.255.248
duplex auto
speed auto
!
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
!
interface GigabitEthernet0/1.10
description Operations Vlan
encapsulation dot1Q 5
ip address 10.50.1.1 255.255.255.224
ip helper-address 10.50.76.2
!
interface GigabitEthernet0/1.20
description Finance Vlan
encapsulation dot1Q 6
ip address 10.50.1.33 255.255.255.224
ip helper-address 10.50.76.2
!
interface GigabitEthernet0/1.40
description Mgmt&native Vlan
encapsulation dot1Q 8 native
ip address 10.50.1.65 255.255.255.224
!
interface GigabitEthernet0/2
no ip address
duplex auto
speed auto
shutdown
!
interface Serial0/0/0
ip address 10.50.76.1 255.255.255.252
clock rate 2000000
!
interface Serial0/0/1
no ip address
clock rate 2000000
shutdown
!
interface Serial0/1/0
ip address 10.50.76.5 255.255.255.252
clock rate 2000000
!
interface Serial0/1/1
no ip address
clock rate 2000000
shutdown
!
interface Vlan1
no ip address
shutdown
!
router ospf 5
router-id 1.1.1.1
log-adjacency-changes
network 10.50.76.0 0.0.0.3 area 0
network 10.50.76.4 0.0.0.3 area 0
network 10.50.1.0 0.0.0.31 area 0
network 10.50.1.32 0.0.0.31 area 0
network 209.165.200.16 0.0.0.7 area 0
network 209.165.200.8 0.0.0.7 area 0
default-information originate
!
ip classless
ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/0
!
ip flow-export version 9
!
no cdp run
!
line con 0
!
line aux 0
!
line vty 0 4
login
!
end

 

RB#en
RB#sh run
Building configuration...

Current configuration : 1381 bytes
!
version 15.1
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname RB
!
ip dhcp excluded-address 10.50.1.1 10.50.1.10
ip dhcp excluded-address 10.50.1.33 10.50.1.42
!
ip dhcp pool Operations-5
network 10.50.1.0 255.255.255.224
default-router 10.50.1.1
ip dhcp pool Finance-6
network 10.50.1.32 255.255.255.224
default-router 10.50.1.33
!
ip cef
no ipv6 cef
!
license udi pid CISCO2911/K9 sn FTX1524XHOR-
!
spanning-tree mode pvst
!
interface GigabitEthernet0/0
no ip address
duplex auto
speed auto
shutdown
!
interface GigabitEthernet0/1
ip address 10.50.16.1 255.255.255.224
duplex auto
speed auto
standby version 2
standby 65 ip 10.50.16.30
standby 65 priority 110
standby 65 preempt
!
interface GigabitEthernet0/2
no ip address
duplex auto
speed auto
shutdown
!
interface Serial0/0/0
ip address 10.50.76.2 255.255.255.252
!
interface Serial0/0/1
ip address 10.50.76.9 255.255.255.252
clock rate 2000000
!
interface Vlan1
no ip address
shutdown
!
router ospf 5
router-id 2.2.2.2
log-adjacency-changes
network 10.50.76.0 0.0.0.3 area 0
network 10.50.76.8 0.0.0.3 area 0
network 10.50.16.0 0.0.0.31 area 0
!
ip classless
!
ip flow-export version 9
!
no cdp run
!
line con 0
!
line aux 0
!
line vty 0 4
login
!
end

 

RC#sh run
Building configuration...

Current configuration : 1189 bytes
!
version 15.1
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname RC
!
ip cef
no ipv6 cef
!
license udi pid CISCO2911/K9 sn FTX1524ZR0S-
!
spanning-tree mode pvst
!
interface GigabitEthernet0/0
no ip address
duplex auto
speed auto
shutdown
!
interface GigabitEthernet0/1
ip address 10.50.16.2 255.255.255.224
duplex auto
speed auto
standby version 2
standby 65 ip 10.50.16.30
!
interface GigabitEthernet0/2
no ip address
duplex auto
speed auto
shutdown
!
interface Serial0/0/0
no ip address
clock rate 2000000
shutdown
!
interface Serial0/0/1
ip address 10.50.76.10 255.255.255.252
!
interface Serial0/1/0
ip address 10.50.76.6 255.255.255.252
!
interface Serial0/1/1
no ip address
clock rate 2000000
shutdown
!
interface Vlan1
no ip address
shutdown
!
router ospf 5
router-id 3.3.3.3
log-adjacency-changes
network 10.50.16.0 0.0.0.31 area 0
network 10.50.76.4 0.0.0.3 area 0
network 10.50.76.8 0.0.0.3 area 0
!
ip classless
!
ip flow-export version 9
!
no cdp run
!
line con 0
!
line aux 0
!
line vty 0 4
login
!
end

 

S1#sh run
Building configuration...

Current configuration : 1573 bytes
!
version 15.0
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname S1
!
no logging console
!
spanning-tree mode pvst
spanning-tree extend system-id
!
interface Port-channel1
switchport trunk native vlan 8
switchport mode trunk
!
interface FastEthernet0/1
switchport trunk native vlan 8
switchport mode trunk
channel-group 1 mode active
!
interface FastEthernet0/2
switchport trunk native vlan 8
switchport mode trunk
channel-group 1 mode active
!
interface FastEthernet0/3
!
interface FastEthernet0/4
!
interface FastEthernet0/5
!
interface FastEthernet0/6
!
interface FastEthernet0/7
!
interface FastEthernet0/8
!
interface FastEthernet0/9
switchport access vlan 5
switchport mode access
!
interface FastEthernet0/10
!
interface FastEthernet0/11
!
interface FastEthernet0/12
!
interface FastEthernet0/13
!
interface FastEthernet0/14
!
interface FastEthernet0/15
!
interface FastEthernet0/16
!
interface FastEthernet0/17
!
interface FastEthernet0/18
!
interface FastEthernet0/19
!
interface FastEthernet0/20
!
interface FastEthernet0/21
!
interface FastEthernet0/22
!
interface FastEthernet0/23
!
interface FastEthernet0/24
!
interface GigabitEthernet0/1
switchport trunk native vlan 8
switchport mode trunk
!
interface GigabitEthernet0/2
!
interface Vlan1
no ip address
shutdown
!
interface Vlan5
no ip address
!
interface Vlan8
ip address 10.50.1.70 255.255.255.224
!
ip default-gateway 10.50.1.65
!
line con 0
!
line vty 0 4
login
line vty 5 15
login
!
end

 

S2#sh run
Building configuration...

Current configuration : 1535 bytes
!
version 15.0
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname S2
!
no logging console
!
spanning-tree mode pvst
spanning-tree extend system-id
!
interface Port-channel1
switchport trunk native vlan 8
switchport mode trunk
!
interface FastEthernet0/1
switchport trunk native vlan 8
switchport mode trunk
channel-group 1 mode active
!
interface FastEthernet0/2
switchport trunk native vlan 8
switchport mode trunk
channel-group 1 mode active
!
interface FastEthernet0/3
!
interface FastEthernet0/4
!
interface FastEthernet0/5
!
interface FastEthernet0/6
!
interface FastEthernet0/7
!
interface FastEthernet0/8
!
interface FastEthernet0/9
switchport access vlan 5
switchport mode access
!
interface FastEthernet0/10
!
interface FastEthernet0/11
!
interface FastEthernet0/12
!
interface FastEthernet0/13
!
interface FastEthernet0/14
!
interface FastEthernet0/15
!
interface FastEthernet0/16
!
interface FastEthernet0/17
switchport access vlan 6
switchport mode access
!
interface FastEthernet0/18
!
interface FastEthernet0/19
!
interface FastEthernet0/20
!
interface FastEthernet0/21
!
interface FastEthernet0/22
!
interface FastEthernet0/23
!
interface FastEthernet0/24
!
interface GigabitEthernet0/1
!
interface GigabitEthernet0/2
!
interface Vlan1
no ip address
shutdown
!
interface Vlan8
ip address 10.50.1.71 255.255.255.224
!
ip default-gateway 10.50.1.65
!
line con 0
!
line vty 0 4
login
line vty 5 15
login
!
end

 

S3#sh run
Building configuration...

Current configuration : 1122 bytes
!
version 15.0
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname S3
!
spanning-tree mode pvst
spanning-tree extend system-id
!
interface FastEthernet0/1
!
interface FastEthernet0/2
!
interface FastEthernet0/3
!
interface FastEthernet0/4
!
interface FastEthernet0/5
!
interface FastEthernet0/6
!
interface FastEthernet0/7
!
interface FastEthernet0/8
!
interface FastEthernet0/9
!
interface FastEthernet0/10
!
interface FastEthernet0/11
!
interface FastEthernet0/12
!
interface FastEthernet0/13
!
interface FastEthernet0/14
!
interface FastEthernet0/15
!
interface FastEthernet0/16
!
interface FastEthernet0/17
!
interface FastEthernet0/18
!
interface FastEthernet0/19
!
interface FastEthernet0/20
!
interface FastEthernet0/21
!
interface FastEthernet0/22
!
interface FastEthernet0/23
!
interface FastEthernet0/24
!
interface GigabitEthernet0/1
!
interface GigabitEthernet0/2
!
interface Vlan1
ip address 10.50.16.3 255.255.255.224
!
ip default-gateway 10.50.16.1
!
line con 0
!
line vty 0 4
login
line vty 5 15
login
!
end

 

S4#sh run
Building configuration...

Current configuration : 1122 bytes
!
version 15.0
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname S4
!
spanning-tree mode pvst
spanning-tree extend system-id
!
interface FastEthernet0/1
!
interface FastEthernet0/2
!
interface FastEthernet0/3
!
interface FastEthernet0/4
!
interface FastEthernet0/5
!
interface FastEthernet0/6
!
interface FastEthernet0/7
!
interface FastEthernet0/8
!
interface FastEthernet0/9
!
interface FastEthernet0/10
!
interface FastEthernet0/11
!
interface FastEthernet0/12
!
interface FastEthernet0/13
!
interface FastEthernet0/14
!
interface FastEthernet0/15
!
interface FastEthernet0/16
!
interface FastEthernet0/17
!
interface FastEthernet0/18
!
interface FastEthernet0/19
!
interface FastEthernet0/20
!
interface FastEthernet0/21
!
interface FastEthernet0/22
!
interface FastEthernet0/23
!
interface FastEthernet0/24
!
interface GigabitEthernet0/1
!
interface GigabitEthernet0/2
!
interface Vlan1
ip address 10.50.16.4 255.255.255.224
!
ip default-gateway 10.50.16.2
!
line con 0
!
line vty 0 4
login
line vty 5 15
login
!
end

0 Helpful
Customers Also Viewed These Support Documents
Review Cisco Networking for a $25 gift card