[Packet Tracer] How to fix "Server Reset Connection"

[nanjero_echizen05]

I have an HQ router connected to a ISP router with an http server. The HQ router has a nat to translate all inside networks to 1 public IP:

• HQ(config)#ip nat pool Public_Address 199.199.199.1 199.199.199.1 netmask 255.255.255.252
• HQ(config)#ip nat inside source list 1 pool Public_Address overload

I also have 2 ACLs on the serial link of the HQ side for the HQ and the ISP:

• access-list 100 permit tcp any any established (IN)

• access-list 101 permit tcp any 201.10.10.0 0.0.0.255 eq www (OUT)

When I try to access the http server with a web browser sometimes it will succeed sometimes I will get a "server reset connection"

[Julio E. Moisa]

Hi,

This link should be useful to fix the Server connection:

https://learningnetwork.cisco.com/thread/84469

Hope it is useful

:-)

[alanaziz808427234]

Before you submit something, check the validity of your info.

THE LINK IS NO LONGER AVAILABLE.

THANK YOU.