I just found Packet Tracer today and it's a great tool to help me study. But one of the first things I noticed is I cannot do a show run int xxxxx command. I thought perhaps it was a IOS version issue so I did the upgrade to version 15 and still a no-go.
This would be extremely helpful as I get a more complex configuration going. any ideas why it doesn't work or how to get it to work?
Solved! Go to Solution.
Hi @dalbright1 ,
In PacketTracer, to see the settings in an interface you can use these commands:
#show ip interface brief
#show ip interface gigabitEthernet 0/0
#show interfaces gigabitEthernet 0/0