Packet Tracer Simulation - Unable to reach Internet

[andydiaz755665844]

Help with routing please.

Created a sample network, but having trouble routing 'Test Ntwk' out to the internet.

Internet is reachable from 'Prod Ntwk'

From Test, trying to reach DNS 10.10.2.2

- tracert ends at 192.168.100.2 (int of 2911 rtr, connected to core switch)

- ping from any endpoint reaches 192.168.200.2 (int of 2911 rtr, connected to Wireless rtr's LAN int)

Maybe route to Test Ntwk is supposed to exist in the wireless router??

I attached packet tracer file (renamed file .pkt to .txt for upload).

[Georg Pauwen]

Hello.

there is no attachment. You can also ZIP the .pkt file and attach the zip file.

[andydiaz755665844]

Forgot to attach.

Thanks!

[Georg Pauwen]

Hello,

where is 23.1.2.2, the IP address you cannot reach ? I cannot reach that address from PROD NETWORK either...

[andydiaz755665844]

My mistake, typo. 

Supposed to be 10.10.2.2

Attached is the updated file.

[Georg Pauwen]

Hello,

what are the exact requirements of this project ? I think the home router you have connected has only two interfaces, there is no configurable routing, so you can only have access from one LAN. 

[andydiaz755665844 · Accepted solution]

Hi,

It is only a test setup.

Unfortunately in packet tracer the option for 'Advanced Routing' in the device is disabled.

At least I know that the fix is to point next hop back to the 2911 RTR for the 'TEST Ntwk' segments.

Thanks!