PBR & ACL

[Ramesh Babu]

I need one help. I want to know below configuration how it will work ?

1. 1st ACL will work 

2. or PBR

3. or If acl is match then traffic will pass, pbr wont check? hence could you please tell me.

interface GigabitEthernet0/0
description  LAN
ip address 11.27.12.55 255.255.255.192
ip access-group BT_198 in
ip policy route-map BM-PBR

[Daniele Giordano]

Hi, is it an ingress interface or egress?

Anihow check the order of operations of the router:

Regards.

[Ramesh Babu]

Hi,

Its ingress interface.

I want to know,

1. 1st ACL will work 

2. or PBR

3. or If acl is match then traffic will pass, pbr wont check? 

[Daniele Giordano]

As you can see in the order of operations, the incoming traffic pass to ACL (point 9) and then the packets not discard by ALC are passed to Policy Routing (last point).

Regards.

[mkazam001]

If the ingress traffic matches the acl - then it will be permitted or denied based on the acl

If permitted - then will be routed via policy routing if it matches any statements in the route map

If denied - then no effect of policy routing to that traffic

I think thats how it would work

Regards, mk

[Ramesh Babu]

Ok Thanks for your info i will check and update.