PC Cant catch dhcp

[Malter17]

why can't the pc catch dhcp?
even though my configuration remains the same as usual...
like

For

Switch Config:

No IP domain-lookup
Vlan 10
Name Malter
Exit
Int range fa 0/2-11
Switchport access vlan 10
No sh
Int fa 0/1
Trunk mode switchport

Router Config:

No IP domain-lookup
Int fa 0/1.10
encapsulation dot1Q 10
IP address 192.168.100.1 255.255.255.0
No sh
Exit

btw the switch and router are connected to 1 hub

[Malter17]

Ah, sorry sir, at first it didn't work, it turned out that my Cisco software was having problems after I reinstalled it and finally got the DHCP IP.
Thank you very much for everything sir, sorry to bother you...

[M02@rt37 · Accepted solution]

you're so welcome @Malter17 

[Malter17]

Sir, I want to ask again

Do you have to configure the router before config that you provide?

Router Config:

No IP domain-lookup

Intfa 0/0.50

encapsulation dot1Q 50

IP address 10.10.10.50 255.255.255.0

No sh

Exit

or is there something wrong with the configuration above?

because when I opened it again today it couldn't even work anymore

[M02@rt37 · Accepted solution]

Hello @Malter17 

DHCP server configured on the Router ? service dhcp command in not disable ?

Do #show interface trunk on Switch and copy/paste the output here please.

[Malter17]

still can't get DHCP... then my server won't connect either

[M02@rt37 · Accepted solution]

@Malter17 

On all your Switches there is a mis configuration:

Delete the switchport mode dynamic auto command on ports where PC are connected !

[Malter17]

hah?
even though I have never configured it like that...