When I am logged in to the vpn I can only ping the ip address of each device/computer connected but not the computer/host name. This used to work but now I'm not sure what I did to make it not work.
Do I need to add a command or enable something? If I am connected to the network directly then I can ping the hostname just fine, but not when I'm connected through the vpn. The 192.168.10.1 network is what I am trying to access through the vpn
Thanks, config below as well.
Building configuration...
Current configuration : 4217 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname lucee
!
boot-start-marker
boot system flash:c1841-advsecurityk9-mz.124-25c.bin
boot-end-marker
!
enable secret 5 $1$ilzT$C2t
!
aaa new-model
!
!
aaa authentication login userauthen local
aaa authorization network groupauthor local
!
aaa session-id common
no ip cef
!
!
ip auth-proxy max-nodata-conns 12
ip admission max-nodata-conns 12
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.1 192.168.1.9
ip dhcp excluded-address 192.168.1.41 192.168.1.254
!
ip dhcp pool gresham
network 192.168.1.0 255.255.255.0
dns-server 64.105.163.106 64.105.172.26
default-router 192.168.1.1
lease 2
!
!
no ip domain lookup
ip domain name site.com
!
!
crypto pki trustpoint TP-self-signed-3233092784
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3233092784
revocation-check none
rsakeypair TP-self-signed-3233092784
!
!
username username password 7 0476082D0D
!
!
!
!
crypto isakmp policy 10
encr 3des
authentication pre-share
group 2
crypto isakmp nat keepalive 20
!
crypto isakmp client configuration group vpnname
key keyname
pool vpnpool
acl 102
crypto isakmp profile ISAKMPprof
match identity group vpnname
client authentication list userauthen
isakmp authorization list groupauthor
client configuration address respond
virtual-template 3
!
!
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
!
crypto ipsec profile IPSecprof
set transform-set ESP-3DES-SHA
set isakmp-profile ISAKMPprof
!
!
!
!
interface FastEthernet0/0
no ip address
ip virtual-reassembly
duplex auto
speed auto
no keepalive
!
interface FastEthernet0/0.1
encapsulation dot1Q 1 native
ip address 192.168.1.1 255.255.255.0 secondary
ip address xx.x.xx.xx 255.255.255.224
ip access-group 111 in
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
!
interface FastEthernet0/0.5
description VER=1; PUR=LAN; DES=uplink; DEST=gbaby_Gi0/1;
encapsulation dot1Q 5
ip address 192.168.10.1 255.255.255.0
ip access-group 112 in
ip virtual-reassembly
ip tcp adjust-mss 1452
!
interface FastEthernet0/1
no ip address
ip virtual-reassembly
shutdown
duplex auto
speed auto
no keepalive
!
interface Serial0/0/0
no ip address
encapsulation frame-relay IETF
no ip mroute-cache
service-module t1 timeslots 1-24
service-module t1 fdl both
frame-relay lmi-type ansi
!
interface Serial0/0/0.1 point-to-point
frame-relay interface-dlci 16 ppp Virtual-Template1
!
interface Virtual-Template1
ip address negotiated
ip nat outside
ip virtual-reassembly
ip tcp adjust-mss 1452
ppp chap hostname 5588
ppp chap password 7 115A4C
ppp ipcp dns request
ppp ipcp route default
ppp ipcp address accept
!
interface Virtual-Template3 type tunnel
ip unnumbered FastEthernet0/0.1
tunnel mode ipsec ipv4
tunnel protection ipsec profile IPSecprof
!
ip local pool vpnpool 172.16.1.1 172.16.1.10
ip forward-protocol nd
!
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 600 life 86400 requests 10000
ip nat pool nat xx.x.xx.x xx.x.xx.x netmask 255.255.255.224
ip nat inside source list 105 pool nat overload
!
access-list 102 permit ip 192.168.10.0 0.0.0.255 any
access-list 105 deny ip 192.168.1.0 0.0.0.255 172.16.0.0 0.0.255.255
access-list 105 deny ip 192.168.10.0 0.0.0.255 172.16.0.0 0.0.255.255
access-list 105 permit ip 192.168.1.0 0.0.0.255 any
access-list 111 permit udp any any eq bootps
access-list 111 deny ip 192.168.1.0 0.0.0.255 192.168.10.0 0.0.0.255
access-list 111 permit ip 192.168.1.0 0.0.0.255 any
access-list 112 deny ip 192.168.10.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 112 permit ip 192.168.10.0 0.0.0.255 any
!
!
control-plane
!
!
line con 0
line aux 0
line vty 0 4
logging synchronous
transport input ssh
!
scheduler allocate 20000 1000
end
