01-26-2024 02:58 AM
Good morning everyone,
I created a small network(beginner), everything seems ok but I can't ping.
Can anyone please address me in the right direction to solve the problem?
Thanks in advance
Solved! Go to Solution.
01-26-2024 07:12 AM
Do you modified as I suggested ?
01-26-2024 03:10 AM
Hello @C_G
On Switches 1 and 2 configure Gig0/1 like this:
On Router1 there is a mistake between Giga0/0/0 and 0/0/1 as concerned IP ADDRESS and the global confoguration also.
These interfaces have to be configured with sub-interfaces like this (note that I invert IP between interfaces also):
PC0 should be able to ping PC1 now.
01-26-2024 04:33 AM
Hello,
what are the device passwords ? Can you unlock the logical view ?
01-26-2024 05:49 AM
Hello @Georg Pauwen
No need password
Clic first on config tab, select one interface, and go back to CLI !
01-26-2024 06:36 AM
01-26-2024 07:12 AM
01-26-2024 11:25 PM
Hi MO2, thanks very much for your help.
Appreciated it
01-26-2024 11:27 PM
You're so welcome @C_G
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide