Pix 535, 355012T and 355012G routing

[awakenelephant1]

I have a pix 535, 3550 12T and a 3550 12G.

The 3550 12T and 12G are connected via etherchannel using layer 3 ports.

The 12G is connected to the PIX via layer 3 port.

I am troubleshooting via PING these are my results.

HOST can ping 10.1.5.9 ( vlan 2 on 12T ), 10.1.5.17 ( vlan 3 on 12T ) , 10.1.5.74 ( 12T )

PIX 535 can ping 10.1.5.2 ( 12G ), 10.1.5.73 ( 12G ),

355012T can ping 10.1.5.9 ( vlan 2 ) , 10.1.5.10 ( host ) , 10.1.5.17 ( vlan 3 ), 10.1.5.18 ( host ), 10.1.5.74 ( 12T ), 10.1.5.73 ( 12G )

355012G can ping 10.1.5.1 ( PIX ), 10.1.5.2 ( 12G ), 10.1.5.73 ( 12G ), 10.1.5.74 ( 12T )

I have been trying to route the pix to the hosts and switches to the pix but not much luck yet.

any suggestions?

[awakenelephant1]

added a route which worked

now these are the new pings

HOST can ping 10.1.5.9, 10.1.5.17, 10.1.5.74

PIX can ping 10.1.5.2, 10.1.5.73, 10.1.5.74

355012T can ping 10.1.5.9, 10.1.5.10, 10.1.5.17, 10.1.5.18, 10.1.5.74, 10.1.5.73, 10.1.5.2, 10.1.5.1

355012G can ping 10.1.5.1, 10.1.5.2, 10.1.5.73, 10.1.5.74

[awakenelephant1]

update

The host is pinging 1 in 4 at 10.1.5.73 and same for 10.1.5.2 but pings 10.1.5.1

The 12G is pinging 1 or 2 in 5 at the vlan on 10.1.5.9 and the host on 10.1.5.10

The 12T can ping everything

the PIX cant ping the vlans or hosts

[awakenelephant1]

host can now ping 10.1.5.73, 10.1.5.2 and 10.1.5.1

12G can ping 10.1.5.9 but not hosts on 10.1.5.10