cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
6538
Views
20
Helpful
3
Replies

Port-channel with different 10G sfp

Steev112
Level 1
Level 1

Hi,

Can i configure port channel using different 10 SFP model (SFP-10G-SR-S,SFP-10G-LR-S), 

switch 1 gig0/1 (SFP-10G-SR-S) --------- Switch 2 gig0/1 (SFP-10G-SR-S)

switch 1 gig0/2 (SFP-10G-LR-S) --------- Switch 2 gig0/2 (SFP-10G-LR-S)

Thanks,

2 Accepted Solutions

Accepted Solutions

Hello,

the physical interfaces do not matter as long as the speed is the same. So your SFPs will work fine together in a port channel.

View solution in original post

As a cautionary note - make sure the SR are connected with multimode fiber, and the LR are connected with Singlemode fiber (end to end, if you have intermediate fiber patch panels).

View solution in original post

3 Replies 3

Hello,

the physical interfaces do not matter as long as the speed is the same. So your SFPs will work fine together in a port channel.

As a cautionary note - make sure the SR are connected with multimode fiber, and the LR are connected with Singlemode fiber (end to end, if you have intermediate fiber patch panels).

Thanks gpauwen and pwwiddicombe for the support

Review Cisco Networking for a $25 gift card