06-23-2013 09:36 PM - edited 03-07-2019 02:02 PM
I have a detail of one port which is mention below ?
#sh int gigabitEthernet 1/0/1
GigabitEthernet1/0/1 is up, line protocol is up (connected)
Hardware is Gigabit Ethernet, address is 001f.6ded.7081 (bia 001f.6ded.7081)
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 2/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s, media type is 10/100/1000BaseTX
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:21, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 974000 bits/sec, 153 packets/sec
5 minute output rate 781000 bits/sec, 172 packets/sec
6747204 packets input, 4393962598 bytes, 0 no buffer
Received 35420 broadcasts (0 multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 18758 multicast, 0 pause input
0 input packets with dribble condition detected
14777080 packets output, 5729709643 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
I want to knw the function of mention port detail which is in BOLD mark ?
06-23-2013 09:44 PM
HI Naitik,
Hope below link has all informations which you are looking for.
http://www.tek-tips.com/faqs.cfm?fid=1311
Please ,et us know if you need any thing more in specific.
Hope that helps.
Regrads
Najaf
Please rate when applicable or helpful !!!
06-23-2013 09:46 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide