Port not supplying POE on C9400-LC-48U

[Steve5284]

Port 47 on a brand new C9400-LC-48U module is not supplying POE, it does support a network connection. "sh power inline g5/0/47" does not show any issues. It is the same as other ports on the card. We have not tried every port on the module, but the devices do get POE and come up on other ports on the module.

>sh power inline g5/0/47

Available:1250.0(w) Used:493.6(w) Remaining:756.4(w)

Interface Admin Oper Power(Watts) Device Class
From PS To Device
--------- ------ ---------- ---------- ---------- ------------------- -----

Gi5/0/47 auto off 0.0 0.0 n/a n/a

Interface AdminPowerMax AdminConsumption
(Watts) (Watts)
---------- --------------- --------------------

Gi5/0/47 60.0 15.4

[balaji.bandi]

as per the information not see any issue ? what device is this ? is that device works on other port in the module ?

Cisco UPOE on each of its 48 RJ45 ports. for that module.

can you post the below details :

#show power inline Gi5/0/47 detail
#show run inter gi5/0/47

Also give us what is the version of IOS XE code running oin this Kit.

[Leo Laohoo]

Post the complete output to the command "sh version".  

[marce1000]

 - FYI : https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr51530

 M.