09-11-2007 06:13 AM - edited 03-05-2019 06:24 PM
Hi.
How can I to configure one port priority in my switch 2950 or 2960? (Without create QoS and vlans) I want that a specific port of switch send data first by uplink!
Thanks
09-11-2007 07:27 AM
Well, I'm afraid the way to do this is to use the QoS tools.
- Mark the packets you receive from the port in question with a particular CoS value, say 6 or 7. mls qos cos 6
- Enable WRR queueing with an expedite queue, say, wrr-queue bandwidth 10 10 10 0. This will make queue 4 an expedite queue, which gives it absolute priority. It is where the CoS 6 and 7 packets will go.
Kevin Dorrell
Luxembourg
09-11-2007 07:49 AM
Hi.
But i want priority to send only (and just in one switch). To receive it's not necessary. Anything like "switchport priority ..." That create maybe a tag in the frame to switch understand and see the port like priority.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide