About Peterson Cristovam

Peterson Cristovam · 09-11-2019

Jabber 12.7.0 has improved user experience, and set the default design as "Modern" I want to put the Classic design as default, however, I am not finding in the Parameters Reference Guide for Cisco Jabber, the syntax to change the UXModel Parameter. ...

Peterson Cristovam · 01-07-2019

Hi, all I am newbie in the devnet world. I am finding some codes using suds and zeep to connect via AXL to the CUCM. There is any advantage to use suds or zeep or in end of the day, the result is exactly the same? Best Regards

Peterson Cristovam · 11-20-2018

Hi, folks I am trying to deploy MRA in an environment wit ha dedicated TFTP. Dedicated TFTP means CUCM running the TFTP service only (no CUCM service). The server is not discovered by Exp-C, if the CUCM service is not running. I am avoiding to enab...

Peterson Cristovam · 09-07-2018

Hi folks I am setting up a SIP trunk between the CUCM 11.5 and a system called Rauland (nurse system). There is no CUBE. It is a straight sip trunk between them. The Rauland team asked me to: Disable the SIP Session Timer: To avoid sending a re-INVIT...

Peterson Cristovam · 09-07-2018

Hi folks I am setting up a SIP trunk between the CUCM 11.5 and a system called Rauland (nurse system). There is no CUBE. It is a straight sip trunk between them. The Rauland team asked me to: Disable the SIP Session Timer: To avoid sending a re...

Peterson Cristovam · 12-20-2023

Hello WillThe script we are talking about is the SIP Normalization script.In CUCM Publisher go to Device > Device Settings > SIP Normalization Script and create a new one.Once created it is time to apply it into the SIP Trunk(s) you have with the Rau...

Peterson Cristovam · 10-06-2023

HiI used the following SIP Normalization Script:M = {}function M.outbound_INVITE(msg)msg:removeHeader("Session-Expires")endreturn M

Peterson Cristovam · 11-23-2022

HiI used the following SIP Normalization Script:M = {}function M.outbound_INVITE(msg)msg:removeHeader("Session-Expires")endreturn M

Peterson Cristovam · 05-20-2022

I am also trying to find a way to set up my Cisco router for the SandBox collaboration. @bigevilbeard here is the information displayed on a sandbox collaboration

Peterson Cristovam · 09-11-2019

jabbI found it It is under Client https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/12_7/cjab_b_parameter-reference-guide-jabber-127/cjab_b_parameter-reference-guide-jabber-127_chapter_011.html#reference_B422E797A575DD26F869FE1DAFD0CB96

Member Since	‎06-09-2006 11:47 AM
Date Last Visited	‎12-27-2023 09:09 AM
Posts	627
Total Helpful Votes Received	30

User Statistics

User Activity

Jabber 12.7.0 - Modern Design

Python + zeep or suds

MRA + Dedicated TFTP Server

Lua Script - CUCM SIP Trunk - Disabling SIP session timer

CUCM SIP Trunk - Disabling SIP session timer

Re: CUCM SIP Trunk - Disabling SIP session timer

Re: CUCM SIP Trunk - Disabling SIP session timer

Re: CUCM SIP Trunk - Disabling SIP session timer

Re: Hardware VPN - Collaboration Sandbox

Re: Jabber 12.7.0 - Modern Design