cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
283
Views
0
Helpful
1
Replies

port-security on portchannels ?

gnijs
Level 4
Level 4

switchport port-security maximum 40

switchport port-security

1) Does anyone know if this is supported on C3750 switches on Portchannels or will be supported in the future ?

2) Will it work if i configure it on the physical interface, instead of the Portchannel interface ?

You might think, why on earth put this on a portchannel ? The portchannel only has one vlan allowed, and it connects to a HP Blade PC chassis with 20 internal PCs. Max mac address is so 40 (dual nic PCs)

regards,

Geert

1 Reply 1

Edison Ortiz
Hall of Fame
Hall of Fame

Geert,

It's not supported at the moment and I don't think it may be supported in the future due to its complexity.

Based on the current documentation:

Port Security Configuration Guidelines

Follow these guidelines when configuring port security:

•Port security can only be configured on static access ports or trunk ports. A secure port cannot be a dynamic access port.

•A secure port cannot be a destination port for Switched Port Analyzer (SPAN).

•A secure port cannot belong to a Fast EtherChannel or a Gigabit EtherChannel port group.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_46_se/configuration/guide/swtrafc.html#wp1038501

HTH,

__

Edison.

Review Cisco Networking for a $25 gift card