Portchannel Numbering on 6500 (VSS)

[brunnerb]

Hello, (sorry for my poor english)

I have a problem with 6505 (with VSS).

I have created some L2 portchannels with number 50,51,52...58. Portchannel 1,2,10 and 11 was always created.

After that I notice that I forgot channel number 55 and I created it too.

Now the order of portchannel interfaces are wrong in my config.

I see in the config (and sh ip int brief) portchannel 1,10,11 then 55 and after that 50,51,..

Whats that? Is that a bug? The order of sh ip int brief is also corrupt.

I have no idea how to order the channel numbers.

Thanks

Bjoern

[Surendra BG]

Wats the IOS we are running??

Regards

Surendra

[Surendra BG]

Just came across this bug.. please verify the if we are hitting the same..

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsq59297

lemme know if this answered ur question!!

Regards

Surendra

[brunnerb]

Hello,

we use a software version:

Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9_WAN-M), Version 12.2(33)SXI5

Our Output of show ip int brief:

----------------------------

Te2/5/4                unassigned      YES NVRAM  up                    up
Te2/5/5                unassigned      YES NVRAM  up                    up
Port-channel1          unassigned      YES NVRAM  up                    up
Port-channel2          unassigned      YES NVRAM  up                    up
Port-channel10         unassigned      YES unset  up                    up
Port-channel11         unassigned      YES unset  up                    up
Port-channel12         unassigned      YES unset  up                    up
Port-channel55         unassigned      YES unset  up                    up
Port-channel50         unassigned      YES unset  administratively down down
Port-channel51         unassigned      YES unset  administratively down down
Port-channel52         unassigned      YES unset  administratively down down
Port-channel53         unassigned      YES unset  up                    up
Port-channel54         unassigned      YES unset  up                    up
Port-channel56         unassigned      YES unset  up                    up
---------------------

Why is Port-channel 55 between 12 and 50?

this is our config:

---------------------

interface Port-channel11
description "Anbindung INRASFWFRE01N10"
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
storm-control broadcast level 20.00
storm-control multicast level 20.00
!
interface Port-channel12
description "Anbindung Passports"
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
storm-control broadcast level 20.00
storm-control multicast level 20.00
spanning-tree portfast edge trunk
!
interface Port-channel55
description "Anbindung GVZREGCB59SW1"
switchport
switchport access vlan 320
switchport mode access
storm-control broadcast level 20.00
storm-control multicast level 20.00
!
interface Port-channel50
description "Anbindung GVZR01AG09SW1"
switchport
switchport access vlan 320
switchport mode access
shutdown
storm-control broadcast level 20.00
storm-control multicast level 20.00

-------------------------

Have you any idea?

Bjoern