05-08-2018 12:28 AM - edited 03-08-2019 02:56 PM
Hi Team,
As i am trying to configure LACP on below module .
Mod Ports Card Type Model
--- ----- -------------------------------------- ------------------ -----------
1 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX
2 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX
3 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX
5 2 Route Switch Processor 720 (Active) RSP720-3C-GE
7 11 7600 ES+ 76-ES+XC-20G3C
Mod Sub-Module Model Hw Status
---- --------------------------- ------------------ ----------- ------- -------
1 Centralized Forwarding Card WS-F6700-CFC 4.1 Ok
2 Centralized Forwarding Card WS-F6700-CFC 4.1 Ok
3 Centralized Forwarding Card WS-F6700-CFC 4.1 Ok
5 Policy Feature Card 3 7600-PFC3C 1.1 Ok
5 C7600 MSFC4 Daughterboard 7600-MSFC4 1.1 Ok
7 7600 ES+ DFC LITE 7600-ES+3C 1.2 Ok
7 ES+ 1xTGE XFP 10xGE SFP 7600-ES+20C 1.1 Ok
For each module we are taking the port and trying to bundle using LACP. But after proper conf the port-channel is not coming up.
Kindly suggest on the above.
05-08-2018 12:39 AM
Hi there,
Please share the config you are applying on the C7600 and also the remote you are connecting the LACP trunk to.
Also anything from the logs: sh log | inc LACP
cheers,
Seb.
05-08-2018 04:47 AM
05-10-2018 10:47 PM - edited 05-10-2018 11:14 PM
Hi Joseph,
Yes,am trying to mix ports from different types of modules.
Module details already shared.
Kindly suggsug in the same.
05-11-2018 04:45 AM
05-11-2018 06:40 AM
Hi Joseph,
Can you please explain the below.
"all their ports to have the same QoS support."
Possible share me ciscocdoc as well.
05-14-2018 06:25 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide