05-29-2011 12:40 AM - edited 03-06-2019 05:15 PM
Dears ,
Im facing strange problem with my ADSL router Cisco 867 ,IOS:flash:c860-universalk9-mz.150-1.M2.bi
The ADSL link showing up ,but ppp is not coming up . the below is the config and debug outputs ...Any clues ?
interface ATM0
no ip address
no atm ilmi-keepalive
!
interface ATM0.35 point-to-point
pvc 0/35
pppoe-client dial-pool-number 1
interface Dialer1
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer remote-name redback
dialer-group 1
ppp authentication pap chap callin
ppp chap hostname user89
ppp chap password 0 123456
ppp pap sent-username user89 password 0 123456
ppp ipcp dns request
ppp ipcp wins request
*Mar 1 00:17:22.343: %DIALER-6-BIND: Interface Vi1 bound to profile Di1
*Mar 1 00:17:22.347: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up
*Mar 1 00:17:22.359: Vi1 PPP: Using dialer call direction
*Mar 1 00:17:22.359: Vi1 PPP: Treating connection as a callout
*Mar 1 00:17:22.359: Vi1 PPP: Session handle[4B000005] Session id[35]
*Mar 1 00:17:22.359: Vi1 PPP: No remote authentication for call-out
*Mar 1 00:17:22.803: Vi1 LCP: Sent too many CONFNAKs. Switch to CONFREJ
*Mar 1 00:17:22.863: Vi1 CHAP: I CHALLENGE id 196 len 36 from "BRAS-304-02"
*Mar 1 00:17:22.863: Vi1 PPP: Sent CHAP SENDAUTH Request
*Mar 1 00:17:22.867: Vi1 PPP: Received SENDAUTH Response FAIL
*Mar 1 00:17:22.867: Vi1 CHAP: Using hostname from interface CHAP
*Mar 1 00:17:22.867: Vi1 CHAP: Using password from interface CHAP
*Mar 1 00:17:22.867: Vi1 CHAP: O RESPONSE id 196 len 47 from "user89"
*Mar 1 00:17:23.267: Vi1 PPP: Using dialer call direction
*Mar 1 00:17:23.267: Vi1 PPP: Treating connection as a callout
*Mar 1 00:17:23.267: Vi1 PPP: Session handle[CD000006] Session id[35]
*Mar 1 00:17:23.267: Vi1 PPP: No remote authentication for call-out
*Mar 1 00:17:23.267: %DIALER-6-UNBIND: Interface Vi1 unbound from profile Di1
*Mar 1 00:17:23.271: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to dow
05-29-2011 12:50 AM
Sorry ,
it worked .....I just put ppp chap refuse under my dialer interface
Regards
Haris
05-29-2011 08:46 AM
I think it would have worked also without
ppp authentication
and chap credentials
also useful:
mtu 1492
no cdp enable
look at debug ppp negotation to see what I mean.
12-01-2021 04:21 PM
HI Haris P,
I'm facing a similar problem. Please help me to share the config ò your device.
Thanks!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide