ok, guys, I know this is an OLD device, but it belongs to a nonprofit and they can't afford new equipment now. they have a 2821 ISR running Version 15.1(1)T. they need to add a few vlans but the vlan subcommand is not available. I am using the comm...
Hi,I'm trying to set up a network for the organization I'm currently posted at and in order to do that I need to access the CLI of the following switch:Cisco SG500-52P 52-port Gigabit POE Stackable Managed SwitchThe console port of the switch is DB9 ...
Hello Guys, Actually I have received a show tech output, and from show running it has configured logging x.x.x.x for syslog.I wanted to know from show tech, will I be able to know if it's really sending logs to the server x.x.x.x. Models: WS-3750X & ...
Hi Gents, any suggestion what is best option for a new access switch? i have 2960x and 3750X here used in production and we are planning to expand so i need to add 2 or more access switches but 2960 and 3750 are both EOL already so any suggestion for...
So I am getting quoted on getting these switches in bulk WS-C3560X-24P-S WS-C3560X-48P-S WS-C3750X-24P-S WS-C3750X-48P-S C3KX-NM-1G C3KX-NM-10G C3KX-PWR-715WAC ...
I am trying to input my hosts and subnetting data in Packet Tracer but I am unable to. Please assist
I am getting ready to update the IOS version on our production switch.When i do a "sho ver" command and look at the hardware, it tells me it is a model "WS-C3650-24PD" switch. Then i navigate to software.cisco.com.I put in "3650" and i get the follow...
Hey! I am doing this lab at the moment and I am having trouble with some basic networking. I can send simple PDUs back and forth from computer/server to the switches then to the routers . But cannot ping from the server to the computer. Any help woul...
DeviceC9300-48UIOS-XE 17.3.5 Port Configurationinterface TenGigabitEthernet1/1/1switchport mode trunkip arp inspection trustchannel-group 1 mode passiveip dhcp snooping trust!interface TenGigabitEthernet3/1/1switchport mode trunkip arp inspection tr...
Hi, If I have a certain SDM template configured for the stack, are those maximums listed with the "show sdm prefer" command per switch or for the entire stack? For example, for an older 3750x you can have as many as 1k security aces for the access te...
Hi,We have DSCP marking setup on LAN switches across branch sites.And we've found only a few queues are in use on WAN router at a branch site.WAN routers are supposed to assign packet to defined queue depending on DSCP set on incoming packet.We're g...
Hi,We have a switch- Catalyst 4500 L3 Switch Software (cat4500e-ENTSERVICES-M), Version 12.2(54)WO, RELEASE SOFTWARE (fc1)Now i need to check the MAC address of this switch but when ran show run it did not give me that output. Could you please help ...
Hi,I am new to Cisco switches but I have spent alot of time attempting to get three switches configured.I have managed to set IP address & have the three switches in a ring. I have downloaded version 5.2 & 6.3 of the Network Assistant and both state ...
hi all,I have configured one of the switches as an NTP server because we don't have an NTP server. and also configured the other switch as an NTP client but the client switch can't sync its's time with the other switch. Please share your thoughts.Tha...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 07-23-2025 01:45 PM | ||
| 07-08-2025 11:44 PM | ||
| 07-04-2025 02:13 AM | ||
| 06-26-2025 10:05 AM | ||
| 06-16-2025 07:47 PM |
| User | Count |
|---|---|
| 13 | |
| 11 | |
| 9 | |
| 5 | |
| 4 |
