privilege level

[mitang.prajapati]

     Hello,

I want to know privilege level of 0-15 in which , what no i give then its show me according to that level security.

[sachinraja]

Hi Mitang

Cisco has  3 priviledge levels by default: (from CCO):

privilege level 1 = non-privileged (prompt is router>), the default level for logging in

privilege level 15 = privileged (prompt is router#), the level after going into enable mode

privilege level 0 = seldom used, but includes 5 commands: disable, enable, exit, help, and logout

You can define commands based on the level of access needed on priv 2-14 .. for eg network mgmt team can be specificaly given priv 2 - with show int commands etc... you can view the level of a logged user using the "show priviledge" command...

Hope this helps.. all the best

Raj

[Ganesh Hariharan]

Hi ,

Check out the below link reagarding privilege levels in routers, Hope that helps to solve your query !!

http://www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a00800949d5.shtml

Regards

Ganesh.H