problem configuring ospf on ring with 3560

[david_gonzalez_araya]

I have a problem with the OSPF configuration on 3560 switch, i delete a link between two switch and y lost the comunication , i add a topology and the sh run of 3 3560 switchs.........can you help me??

BR

David 

[Mark Malone · Accepted solution]

Hi

looks to be miss configured , 10.0.2.1 exists on 2 interfaces , f2 on r1 and r2

[david_gonzalez_araya]

My apology, , i put r1 in r2 again , the correct r2 is here....

[Mark Malone]

ok so to be sure here

when its all up and working you have an ospf to each neighbour and each router knows about every subnet correct ?

if you drop a link traffic doesn't go the other way ? if that's the case something may be up at software level if routing tables are ok , changes the ios version

does anything show in the logs for ospf changes other than the link you dropped

[ritesh998]

hi david,

can you share

#sh ip ospf database

#sh ip ospf neighbor

[david_gonzalez_araya]

i send you the ospf comands result