11-21-2011 09:07 AM - edited 03-07-2019 03:30 AM
Good morning:
I have a problem to create a VLAN with a Cisco 2801.
I need to have base ports FastEthernet 0 / 0 and FastEthernet 0 / 1, in the same VLAN.
Basically I'm trying to switch access redundacion, now I have redundant switches in which I have the servers, but if one of these switches fails, and coincidentally is where I have connected the router, the server runs out of internet connection.
I idea is to connect the FastEthernet 0 / 0 to a switch, and FastEthernet 0 / 1, to the other switch.
but I managed to have these two ports in the same vlan, in order to have a unique IP for both FastEthernet ports.
As I can do this?. do is a lot of documents using the switchport command, but this command is not available in my router, I tried different IOS, and nothing.
Currently I have the following IOS: c2801-adventerprisek9-mz.124-24.T6.bin
thank you very much for your help.
Solved! Go to Solution.
11-21-2011 04:54 PM
Hi,
You can use IRB & a BVI
!
bridge irb
!
!
bridge 111 protocol ieee
bridge 111 priority 65535
bridge 111 route ip
!
!
interface BVI111
description *** VOICE VLAN 111 ***
ip address 172.16.16.1 255.255.255.0
!
int g0/0
description *** TEST VGWAY PRIMARY CONNECTION TO SWITCH TEST-1-G1/0/2 ***
no ip address
bridge-group 111
!
!
int g0/1
description *** TEST VGWAY SECONDARY CONNECTION TO SWITCH TEST-1-G1/0/2 ***
no ip address
bridge-group 111
!
HTH
Alex
Please rate useful posts
11-21-2011 01:01 PM
Hi Martin,
You can not put both interfaces in the same subnet. These ports are routed ports and need to be in a separate IP segments. The router does not support vlan, however it does support 802.1Q with sub-interfaces.
HTH
11-21-2011 04:54 PM
Hi,
You can use IRB & a BVI
!
bridge irb
!
!
bridge 111 protocol ieee
bridge 111 priority 65535
bridge 111 route ip
!
!
interface BVI111
description *** VOICE VLAN 111 ***
ip address 172.16.16.1 255.255.255.0
!
int g0/0
description *** TEST VGWAY PRIMARY CONNECTION TO SWITCH TEST-1-G1/0/2 ***
no ip address
bridge-group 111
!
!
int g0/1
description *** TEST VGWAY SECONDARY CONNECTION TO SWITCH TEST-1-G1/0/2 ***
no ip address
bridge-group 111
!
HTH
Alex
Please rate useful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide