11-19-2012 07:36 AM - edited 03-07-2019 10:07 AM
OK, I am no Cisco guru, and am really stuck here. This is probably not difficult, but I am perplexed at this point.
I have 5 ESX servers that are already fully configured, and were talking across my network earlier. The (2) switches in this enclosure were
manipulated and no longer seem to talk. Basically, just dealing with the first switch, and trying to get it working first. I'll just copy the config over when this one is fixed.
So, the first 16 ports on the switch are connected to the positions 1-16 in the enclosure, where blade servers would be. In this case, positions 1-5 are in use.
In the back of the enclosure, the switch has ports 0/17 - 24 for external connections. 2 ports are in use for a LACP uplink to the core switch. 2 ports are in use for a LAPC uplink to external storage.
I can, from the core switch, pint this switch in the enclosure, and vice versa. I cannot however, from this switch in the enclosure ping any blade switches in the enclosure.
My servers are at 10.10.1.233 - 236
The enclosure's Cisco CS3020 switch is at 10.10.0.18 255.255.0.0
My core switch is 10.10.0.13 255.255.0.0
My config looks like this now:
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname BL465c_SW1
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$e1CS$aYLN09vAVG7LzaKQHseno0
enable password Seagate_2001
!
no aaa new-model
system mtu routing 1500
ip subnet-zero
!
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
interface Port-channel1
description HP CORE
switchport trunk allowed vlan 1-3,100
switchport mode trunk
!
interface Port-channel2
description ESXi VLAN trunk
switchport trunk allowed vlan 1-3,90,100
switchport mode trunk
!
interface Port-channel5
description storage HP-SW1
switchport trunk allowed vlan 90
switchport mode trunk
!
interface FastEthernet0
description ILO connection
no ip address
no ip route-cache
no ip mroute-cache
shutdown
!
interface GigabitEthernet0/1
switchport access vlan 3
switchport mode access
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/2
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/3
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/4
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/5
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/6
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/7
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/8
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/9
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/10
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/11
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/12
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/13
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/14
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/15
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/16
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/17
spanning-tree portfast
!
interface GigabitEthernet0/18
spanning-tree portfast
!
interface GigabitEthernet0/19
switchport trunk allowed vlan 1-3,100
switchport mode trunk
spanning-tree portfast
!
interface GigabitEthernet0/20
description HP CORE
switchport access vlan 3
switchport trunk allowed vlan 1-3,100
switchport mode trunk
channel-protocol lacp
channel-group 1 mode active
spanning-tree portfast trunk
!
interface GigabitEthernet0/21
description Back to HP STORAGE
switchport access vlan 90
switchport trunk allowed vlan 90
switchport mode trunk
channel-protocol lacp
channel-group 5 mode active
spanning-tree portfast trunk
!
interface GigabitEthernet0/22
description HP CORE
switchport access vlan 3
switchport trunk allowed vlan 1-3,100
switchport mode trunk
speed 1000
channel-protocol lacp
channel-group 1 mode active
spanning-tree portfast trunk
!
interface GigabitEthernet0/23
description Back to HP STORAGE
switchport access vlan 90
switchport trunk allowed vlan 90
switchport mode trunk
channel-protocol lacp
channel-group 5 mode active
spanning-tree portfast trunk
!
interface GigabitEthernet0/24
!
interface Vlan1
ip address 10.10.0.18 255.255.0.0
no ip route-cache
no ip mroute-cache
!
interface Vlan2
no ip address
no ip route-cache
no ip mroute-cache
!
interface Vlan3
no ip address
no ip route-cache
no ip mroute-cache
!
interface Vlan90
no ip address
no ip route-cache
no ip mroute-cache
!
ip default-gateway 10.10.0.1
ip classless
ip http server
ip http secure-server
!
snmp-server community public RO
!
line con 0
line vty 0 4
password xxxxx
login
line vty 5 15
password xxxxx
login
!
end
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname BL465c_SW1
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$e1CS$aYLN09vAVG7LzaKQHseno0
enable password ^&%&^
!
no aaa new-model
system mtu routing 1500
ip subnet-zero
!
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1449868288
revocation-check none
rsakeypair TP-self-signed-1449868288
!
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
interface Port-channel1
description HP CORE
switchport trunk allowed vlan 1-3,100
switchport mode trunk
!
interface Port-channel2
description ESXi VLAN trunk
switchport trunk allowed vlan 1-3,90,100
switchport mode trunk
!
interface Port-channel5
description storage HP-SW1
switchport trunk allowed vlan 90
switchport mode trunk
!
interface FastEthernet0
description ILO connection
no ip address
no ip route-cache
no ip mroute-cache
shutdown
!
interface GigabitEthernet0/1
switchport access vlan 3
switchport mode access
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/2
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/3
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/4
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/5
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/6
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/7
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/8
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/9
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/10
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/11
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/12
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/13
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/14
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/15
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/16
speed 1000
spanning-tree portfast
!
interface GigabitEthernet0/17
spanning-tree portfast
!
interface GigabitEthernet0/18
spanning-tree portfast
!
interface GigabitEthernet0/19
switchport trunk allowed vlan 1-3,100
switchport mode trunk
spanning-tree portfast
!
interface GigabitEthernet0/20
description HP CORE
switchport access vlan 3
switchport trunk allowed vlan 1-3,100
switchport mode trunk
channel-protocol lacp
channel-group 1 mode active
spanning-tree portfast trunk
!
interface GigabitEthernet0/21
description Back to HP STORAGE
switchport access vlan 90
switchport trunk allowed vlan 90
switchport mode trunk
channel-protocol lacp
channel-group 5 mode active
spanning-tree portfast trunk
!
interface GigabitEthernet0/22
description HP CORE
switchport access vlan 3
switchport trunk allowed vlan 1-3,100
switchport mode trunk
speed 1000
channel-protocol lacp
channel-group 1 mode active
spanning-tree portfast trunk
!
interface GigabitEthernet0/23
description Back to HP STORAGE
switchport access vlan 90
switchport trunk allowed vlan 90
switchport mode trunk
channel-protocol lacp
channel-group 5 mode active
spanning-tree portfast trunk
!
interface GigabitEthernet0/24
!
interface Vlan1
ip address 10.10.0.18 255.255.0.0
no ip route-cache
no ip mroute-cache
!
interface Vlan2
no ip address
no ip route-cache
no ip mroute-cache
!
interface Vlan3
no ip address
no ip route-cache
no ip mroute-cache
!
interface Vlan90
no ip address
no ip route-cache
no ip mroute-cache
!
ip default-gateway 10.10.0.1
ip classless
ip http server
ip http secure-server
!
snmp-server community public RO
!
line con 0
line vty 0 4
password xxxxx
login
line vty 5 15
password xxxxx
login
!
end
Also, those servers in the enclosure are esxi 4.1 hosts, and will each host vm's from vlan 1, 2, 3. vmware vmotion is on vlan100. All storage is on vlan 90. So, essentially, each port (at least 1-5, currently) will need to talk to all of those vlans.
Can anyone advise?
11-20-2012 11:15 AM
Looks like you have the config posted twice.
Anyway, you could set the ports to Trunk and tag the Virtual NICs with their respective VLAN.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide