I have some problem here about VPC and logical interfaces in my switch nexus 5596. I create two interfaces vlans called Vlan2 and Vlan 900. The Vlan 2 is for management purposes and Vlan 900 is a link to VPC communication.
My problem is - I alway lost my remote connection when a reload my switch and I need stop VPC (no featrue VPC) to fix it. Can you help me ?
Something to clarifiy how vPC works. I am assuming VLAN 2 is your management VLAN and VLAN900 is your vPC peer-keepalive. If you are allowing VLAN900 over the vPC peer-link, this is non-supported and the reason is, vPC peer-keepalive needs to be up before vPC peer-link to be brought up.
One solution is to use dedicated interface for vPC peer-keepalive and allow VLAN900 over it. This also required you to block VLAN900 over the peer-link.
Cisco 2509-RJ freezes during start-up I bought some Cisco 2509-RJ terminal server to work on my labs and was working fine. Today I turned it on and half way through starting up it seems to freeze. I can only find one instance of this happing to ...
Cisco Digital Network Architecture Center Modules(Design Module)Part.2In this article, we are going to talk about the Cisco Digital Network Architecture Center design Module. Cisco DNA Center gives us the flexibility and availability to con...
Connectivity Design considerations and recommendation
1.Management Access connectivity
If there is a dedicated OOB management path, consider connecting to CIMC and MGMT port.
If OOB path is not available, Connect the dedicated Management port to LAN Swi...
Cisco Digital Network Architecture Center Modules In this article, we are going to talk about Cisco Digital Network Architecture Center design Module. Cisco DNA Center gives us the flexibility and scalability to configure multiple fabric sites a...