01-19-2009 05:25 PM - edited 03-06-2019 03:31 AM
Dear All Expert,
Could you let me know command as below that have issue ...this cisco switch 2960G(8ports)
FastEthernet0/7 unassigned YES unset up down
-The status is up but Protocol is down ,
i tried to no shut interface and tried to change cable but it still down ,
Could you let me know, why it happen ?
Best Regards,
Rechard_hk
01-19-2009 05:45 PM
Post a "show interface status . What is hooked to port 7 ?
01-19-2009 05:59 PM
dear Glen,
Sorry now i so far from Cisco switch but i was show int br only:
Branch-Switch#sh ip int br
Interface IP-Address OK? Method Status Protocol
Vlan1 unassigned YES NVRAM administratively down down
Vlan16 192.168.16.253 YES NVRAM up up
FastEthernet0/1 unassigned YES unset up up
FastEthernet0/2 unassigned YES unset up up
FastEthernet0/3 unassigned YES unset up up
FastEthernet0/4 unassigned YES unset up up
FastEthernet0/5 unassigned YES unset up up
FastEthernet0/6 unassigned YES unset down down
FastEthernet0/7 unassigned YES unset up down
FastEthernet0/8 unassigned YES unset up up
GigabitEthernet0/1 unassigned YES unset up up
I did not show int status...
Best Regards,
Rechard_hk
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide