Problem with SVI and L2-Etherchannel

[Sharanjeet_Kumar]

Hi,

I am getting issue with one of my lab, includes SVI and L2-etherchannel. Not able to ping from client 10.0.0.1 to 20.0.0.1. attaching lab image.

Thank You!!!

[MHM Cisco World]

check below

[Flavio Miranda]

Hi @Sharanjeet_Kumar 

 Attach the Project here and let me take a look.

 Zip it first

[Sharanjeet_Kumar]

Hi @Flavio Miranda ,

I am attaching the lab. 

[MHM Cisco World]

in SW1 and SW2 add VLAN 
by 
vlan 10 
vlan 20 
that solution

Note:- you need vlan20 svi in sw0 and sw3 

thanks 
MHM

[Flavio Miranda · Accepted solution]

@Sharanjeet_Kumar 

 You need to add vlan 10 along the path  and add a default route on Sw3.

Take a look on the file I am attaching, it is working.

[Sharanjeet_Kumar]

Hi @Flavio Miranda,

Can you please share the screenshot  of text file you;ve changed on Sw3 and along the path 

Problem is this file requiring lower version of packet tracer.

[Flavio Miranda]

I will add the config in txt file.

[Sharanjeet_Kumar]

Hi @Flavio Miranda ,

Thank you so much. It worked!! 

I was having issues with vlan on sw1 and sw2.

[MHM Cisco World]

No thanks to me 

LoL...

[MHM Cisco World]

Do it by yourself' this make you more acknowledge in network.

Check vlan in each SW 

When one not have vlan add it 

And add svi in sw3.