08-12-2019 12:58 AM
Hello
i have a switch switch planet pl-igs-10020pt :
problem :
the port switch planet ( dwon ) linked with port router Huawei ( up/dwon ):
+++port optique switch planet ( Name: GigabitEthernet 1/10 )
IGS-10020HPT# show interface GigabitEthernet 1/10 switchport
Name: GigabitEthernet 1/10
Administrative mode: trunk
Access Mode VLAN: 1
Trunk Native Mode VLAN: 1
Administrative Native VLAN tagging: disabled
Allowed VLANs: 1-4095
Hybrid port configuration
-------------------------
Port Type: C-Port
Acceptable Frame Type: All
Ingress filter: Disabled
Egress tagging: All except-native
Hybrid Native Mode VLAN: 1
Hybrid VLANs Enabled: 1-4095
IGS-10020HPT# show interface GigabitEthernet 1/10 switchport
Name: GigabitEthernet 1/10
Administrative mode: trunk
Access Mode VLAN: 1
Trunk Native Mode VLAN: 1
Administrative Native VLAN tagging: disabled
Allowed VLANs: 1-4095
Hybrid port configuration
-------------------------
Port Type: C-Port
Acceptable Frame Type: All
Ingress filter: Disabled
Egress tagging: All except-native
Hybrid Native Mode VLAN: 1
Hybrid VLANs Enabled: 1-4095
/////////////////////////////////////////////////////////////////////////////////////////////
GigabitEthernet 1/10 Capabilities:
SFP Vendor P/N: MGB-TLX
SFP Vendor S/N: AG00519202001
SFP Vendor Name: PLANET
SFP Vendor Revision: v2
SFP Type: 1000BASE_LX
Speed cap: 100,1000,auto
Duplex cap: full,auto
Trunk encap. type: 802.1Q
Trunk mode: access,hybrid,trunk
Channel: yes
Broadcast suppression: no
Flowcontrol: yes
Fast Start: no
QoS scheduling: tx-(8q)
CoS rewrite: yes
ToS rewrite: yes
UDLD: no
Inline power: no
RMirror: yes
PortSecure: yes
/////////////////////////////////////////////////////////////////////////////////////////////////
IGS-10020HPT# show interface GigabitEthernet 1/10 status
Interface Mode Speed & Duplex Flow Control Max Frame Excessive Link
---------------------- ------- -------------- ------------ --------- --------- --------
GigabitEthernet 1/10 enabled Auto disabled 9600 Discard Down
IGS-10020HPT# show interface GigabitEthernet 1/10 status[42D [42Dshow interface GigabitEthernet 1/10 switchport [47D [47Dshow interface GigabitEthernet 1/10 tran[40D [40Dshow interface GigabitEthernet 1/10 transceiver
Port Type Speed Wavelength(nm) Distance(m) Temperature(C) Voltage(V) Current(mA) TxPower(dBm) RxPower(dBm)
---- -------------- --------- -------------- ----------- -------------- ----------- ----------- ------------ ------------
[PORT] PORT_NUM = 9 10 1000Base-LX 1000-Base 1310 20000 52.5020 3.2910 30.5280 -5.8821 1.9769
////////////////////////////////////////////////////////////////////////////////////////////////////////////////
interface GigabitEthernet 1/10
no loop-protect
no loop-protect tx-mode
switchport mode trunk
no lldp receive
no lldp transmit
spanning-tree edge
no spanning-tree auto-edge
!/////////////////////////////////////////////////////////////////////////////////////////////////////////////////
There are all check for interface gi1/10 SO i need what configuration in this interface that allow interface UP with interface port router Huwai ( up/dwon ) !!N??????????????,
i wait e reply for this problem switch planet with router ATN950B
thanks in advance
08-12-2019 01:31 AM
Please , i need a help and who can understand and can give me what is configuration in switch planet that allow port UP/UP with port router ATN950B !!!!!!!!??????
thanks in advance
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: