04-16-2008 03:01 AM - edited 03-05-2019 10:24 PM
HI,
I attach my configuration.
There is a problem routing in this configuration, is no possible to ping with this attached configuration to 192.168.15x.x machine and 10.21.18.21 machine.
Now, with this configuration I only can ping to 10.21.18.21 machine...
why?
Best regards and thks.
04-16-2008 03:56 AM
Edgar
I recognize sometimes the need to protect sensitive data. But to post a config about a routing problem in which interfaces are blanked out and ip addresses are hidden is to prevent us from helping you figure out your problem. If we are to be able to help you at all with this issue you must give us reasonable information to work with.
HTH
Rick
04-16-2008 05:24 AM
I agree with Rick, it is hard to know what you have set up with everything important removed. One thing I see is your ip route statement.
Right now you have a default route going to ATM1.1 and there is no metric there.
Then you have a route statment for 192.168.156.0 to go out ATM0.1 with a weight of 200.
Remove the weight.
ip route 192.168.156.0 255.255.255.0 ATM0.1
Then make sure the interface is up/up and that you don't have an acl on the other end blocking ICMP
04-16-2008 10:02 AM
Hi,
First... you are right excuse me!!!!!!!!!!
I only post routing parts because I "play" with routes and metrics and worked fine only one no both.
I'll make the changes
Best regards
04-19-2008 02:08 AM
HI,
Not helpfull...
I'have added static routes as follows:
ip route 192.168.156.0 255.255.255.0 ATM0.1 but
nothing.
what can I do?
04-19-2008 07:17 PM
Edgar:
Como que usted no entiende lo que te estan pidiendo.
Como putas vamos a poder ayudarte y explicarte cuales son las equivocaciones en el config si has escondido toda la informacion pertinente???
Tenemos que ver todos los IP addresses de todos los interfaces, etc...
Ya basta con esa chingueria, hombre..
Gracias :-)
Victor
04-21-2008 04:58 AM
paste your config as requested in the first reply. This will help understand what you have in place. You are using private IP's so no worry of security there.
Also provide:
sh ip int brief
traceroutes from both directions
along with the config.
04-21-2008 12:11 PM
please ignore...just testing.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide