QOS for 3560 access switch

[gscalia01]

   Pleae help

we have a class based qos scheme (see attached file) on our 4500 series access switches and we have a access 3560-48 switch runing IOS  Version 12.2(44)SE3 my question is can I use the same QOS scheme for the 3560 switch?

Tanks,

Jack

[Reza Sharifi]

The commands may not be exactly the same, but the IOS for 3560 supports class based Qos.

here is the config guide for Qos"

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_52_se/configuration/guide/swqos.html#wp1703072

HTH

[gscalia01]

Reza,

will enabling auto QOS on the swith be just as good?

thanks,

Jack.

[Reza Sharifi]

Jack,

Yes, for VoIP Qos parameters, Auto Qos with configure it for you automatically

Have a look at the command reference guide for the policy-map auto Qos will configure for you.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_55_se/command/reference/cli1.html#wp13658183

HTH