QoS marking on 3560G

[saifuddin.miyaji]

We have a very simple setup where the Cisco IP Phone is connected to the 3560G switch. The switch is connected to the Cisco ASA.
We are trying to implement the QoS on ASA for the bandwidth regulation and voice traffic prioritization. We are facing difficulties in marking the voice packets to DCSP EF. The packets coming from IP Phone to ASA Inside interface are always marked as "CS0" rather then "EF". 

We have made the 'msl qos trust' settings on the switchports but still the marking does not change. i.e always CS0.

Any ideas?

Regards

Saif

[johnd2310]

Hi,

You will need to configure qos on the switch and the firewall. Have a look at the following docs for qos configuration:

http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND_40/QoSCampus_40.html

http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/82310-qos-voip-vpn.html

thanks

John