06-08-2007 09:25 AM - edited 03-05-2019 04:35 PM
I have cat 6509 with MSFC.MSFC is used to route traffic between VLANs. there are ip phones on the 6509. Myq question is do I need to configure qos on msfc, or just need configure qos on supervisor?
06-08-2007 11:56 AM
You would require configuration on the supervisor and not the MSFC.
Have a look at these links for QoS with catOS
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008014f8a8.shtml
http://www.cisco.com/en/US/products/hw/switches/ps708/products_white_paper09186a00800c8441.shtml
HTH, rate if it does
Narayan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community