QUick suggestion on OPtic fibre connectivity

[srikanth ath]

Hi

we are using GLC-SX-MM module to,  Multimode fiber 50u OM3 to connect branch office to Head office (disatance apart 200mts). The fiber has LC type connectors on both side, and we  are connecting to the Cat3750(L3) switch to CAT 2960(L2 + 2 sfp combo slots).

switch(3750)>LC--------Fiber-------LC<switch(2960).

laying out the cable patches everything is done.

now i have to do the testing and connectivity part. how should be done.

1. cat 3750 is a dhcp server to branch office(we are giving mac based binding for branch office).  

test ?

1. should the ports connected(2960 to 3750)  has to be made trunking to carry vlans or does it do automatically(as by default  the ports are trunk)

2. how to verify the ports are connected correctly (1. way is to see the led lights on both ends) and how can i check through commands

3.what all the different commandds i can run on these ports.

quick suggestion please as i have very less time to get it done practically.

thanks & regards

srikanth

[srikanth ath]

QUick reply please

1. should the ports connected(2960 to 3750) with fibre  has to be made trunking to carry vlans to each other..

thanks

srikanth

[Somasundaram Jayaraman]

Hi,

if the link carries multiple vlans traffic then the port should be configured as trunk on both sides.

conf ter

inter <>

sw tr encap dot1q

sw mo tr

exit

To check the links are working fine or not, use the below commands

sh int status

sh int trunk

sh interfaces | i line|rate|up

Hope this helps

Cheers

Somu

Rate helpful posts

[srikanth ath]

thanks somu

then what about the speed .. should i have to manually configure anything to speed

like auto negotiation.

full duplex

regards

srikanth

[Somasundaram Jayaraman]

Hi,

pls configure speed auto, duplex full.

When you issue the command show interface <> capabilities you can see the port speed & duplex capabilities.

sample output:

===========

Switch-A#show interface Gig4/3 capabilities
GigabitEthernet4/3
Model                    WS-X4516-10GE-Gbic
Type                     1000BaseT
Speed                    1000
Duplex                   full

Hope this answers your question.

Cheers

Somu

Rate helpful posts