01-13-2017 05:56 AM - edited 03-08-2019 08:54 AM
Hello
The other days I did a Webex to help a customer to configure some vlans and add them to existing trunks.
Something surprised be but I didn't want to ask the customer.
In my lab equipment, if I am on the global config mode or under an interface config mode, I must prefix any show command with the keyword "do" for it to work.
In that customer's equipment, it wasn't required to use the word "do". Show commands worked from anywhere.
Any idea what type of Cisco switches work like that?
Solved! Go to Solution.
01-13-2017 07:14 AM
Yes ios makes you use do but the newer ios-xe and nx-os software is smart enough that you don't have to use do , its not limited to the platform but the software
EDIT:just tested this to be sure , its nx-os only sorry not supported in ios-xe
SWA-LAB5K(config)# show version | i n5000
kickstart image file is: bootflash:///n5000-uk9-kickstart.7.0.6.N1.1.bin
system image file is: bootflash:///n5000-uk9.7.0.6.N1.1.bin
01-13-2017 07:14 AM
Yes ios makes you use do but the newer ios-xe and nx-os software is smart enough that you don't have to use do , its not limited to the platform but the software
EDIT:just tested this to be sure , its nx-os only sorry not supported in ios-xe
SWA-LAB5K(config)# show version | i n5000
kickstart image file is: bootflash:///n5000-uk9-kickstart.7.0.6.N1.1.bin
system image file is: bootflash:///n5000-uk9.7.0.6.N1.1.bin
01-13-2017 02:00 PM
Thank you Mark!!!
Noted. The do not necessary on any platform running nx-os
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide