cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
523
Views
0
Helpful
4
Replies

"ip dhcp snooping trust" command disappeared from physical interfaces after reload

Anas Hijjawi
Level 1
Level 1

Hi,

Our switch got reloaded once, after reload we  found that "ip dhcp snooping trust" command disappeared from physical interfaces.

Tried to find a bug related to the same software but couldn't find.

IOS version: 15.2(3)E

HW model: 3560x

 

Thanks

Thanks, Anas *--* Please rate the useful post,its free ;) *--*
4 Replies 4

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

It could be that the configuration was not saved and after the reboot the switch went back to an older config that did not have "ip dhcp snooping trust" configuration.

HTH

Thanks Reza, the configurations were saved already, although configurations were disappeared from physical interfaces, it was still there on the PO level, but not working.

Thanks, Anas *--* Please rate the useful post,its free ;) *--*

Hi,

Did the switch reloaded on its own, or this was a manual reboot? If it reloaded on its own, is there crash file written on the flash? If it did than there maybe an IOS bug that is causing it to reboot. Anything in the logs?

HTH

 

Hi reza, it was a power failure
Thanks, Anas *--* Please rate the useful post,its free ;) *--*
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: