Hi guys
I am trying to configure authentication login with radius server. This configuration is working fine with 2960, 3860, but something wrong with my 4507
- From 2960, 3860: user privilege 15 and privilege 1 are authenticated right, i can see everything by "debug radius; terminal monitor"
- From 4507: user privilege 15 is authenticated fine, but user privilege 1 is not authenticated, and the crazy thing is that i can not see log with these commands "debug radius; terminal monitor" even user is authenticated or not.
I post my brief configuration here by image, because my older posts are marked as spam (don't know why)
- What's in the radius server's logs for these particular attempts, also note if there is any difference in the server's logs for the switch-models were the authentication is working properly.
M.
Hi Ha,
Just curios, I do not see a local user of privilege level 1. That means, it will be checked only on the radius server. Is that correct?