Hi erevyone, I have a cisco sf300-24p switch and i need to authenticated this on radius server. Radius server deployed using FreeRadius package, on debian 9.1. On radius I created user same this config:
admin Cleartext-Password := "admin"
Service-Type := NAS-Prompt-User,
Cisco-AVPair := "lcp:interface-config#1=rate-limit input 2000 8000 8000 conform-action transmit exceed-action drop"
and cannot login correctly on admin user.
And I have user bob with password hello (default user in radius config) without Service-Type and Cisco-AVPair parameters
I have successfully login with user bob and authentication failed on user admin
See cisco config on file