rapid psvt statement

[axfalk1]

in the cat-2950 config there's the following statements:

no spanning-tree optimize bpdu transmission

spanning-tree extend system-id

Can anybody please point me to a doc where I can read up on these commands?

thanks.

[sgjmgreve]

Hi,

Maybe this link will help?

http://www.cisco.com/en/US/customer/products/hw/switches/ps628/products_command_reference_chapter09186a00800c6f2d.html

Or if you use another ios version check with that documentation.

Best regards,

Stefan

[axfalk]

Thanks for your response. Still could not find the no spanning-tree optimize bpdu transmission command on that link, which pretty much mirrors my unsuccessfull attempts finding it any place else.

Does anybody happen to know what this command does?

Thanks again.

[pmajumder]

Hello,

Check the response at this thread.

https://puck.nether.net/pipermail/cisco-nsp/2005-February/017366.html

Regards

Pradeep

[axfalk]

Thanks for your help. No wonder I could not find it - it's practically undocumented....