Hi everyone. I need your help on one issue about rate-limiting. I work in service provider company and we have WS-C6506-E Catalyst which is connected to another ISP and is working mainly for internet service. However there is a problem with rate policing. In customer side upload speed is not limited(Inbound for our switch interface).
The configuration example:
class-map match-all ratelimite
police 10240000 320000 320000 conform-action transmit exceed-action drop
And service policy is implemented as both input and output in interface vlan. However when we check we see that while input speed is policed, upload speed is freely used by customers.
The OSPF Type-2 LSA is one of the misunderstanding LSA among all the popular LSAs in OSPF , most people learns that this kind of LSA (Type-2) is generated by DR the Designated Router in a broadcast segment, for example when two or more than two routers ar...
Table of Contents
RADIUS has been the de-facto protocol for Remote Access Authentication for decades. RADIUS/UDP as defined by RFC 2865 has traditionally used MD5 for authentication and integrity. Unfortunately, successful attacks ...
Since 2008, the ASR 1000 platforms have dramatically changed the WAN edge router’s capabilities. With its very own QuantumFlow Processor (QFP) innovation, the data plane was powered to offer advanced scalable services along with high performance. Fast for...
Traditionally Cisco has used several different methods for storing passwords and keys in IOS. The older methods are Type 5 (MD5 hash) & Type7 (Vigenere obfuscation). We enabled Type 7 encryption with the CLI service password-encryption...
AI spoofing detection is a feature in AI Endpoint Analytics released in Cisco DNA Center v18.104.22.168, that identifies endp...