06-29-2009 07:05 AM - edited 03-06-2019 06:30 AM
Is there a way to recover from a switch being brought online inadvertently, which was configured as vtp server with a higher revision number, and incorrect vlan configurations? The switch updated the existing online switches.
Solved! Go to Solution.
06-29-2009 07:16 AM
Sadly - no.
You need to remove the offending switch, then re-update the proper VTP server.
HTH>
06-29-2009 07:16 AM
Sadly - no.
You need to remove the offending switch, then re-update the proper VTP server.
HTH>
06-29-2009 07:26 AM
Thanks, that's what I suspected would need to be done.
06-29-2009 07:19 AM
Do you have a backup config from your normal vtp servers ? You would also have to have a backup of your vlan.dat files from the servers to recover . Otherwise its probably a manual recovery on your main vtp servers once you pull off the offending switch that made the change or change it to transparent and back.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide