08-27-2012 03:08 AM - edited 03-07-2019 08:32 AM
Hi i have one question . İn router we cant have etherchannel but if we want to have redundancy and increase speed what we should do?
Sent from Cisco Technical Support iPhone App
08-27-2012 06:49 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Some routers do support Etherchannel.
For those that don't, you often can route across multiple links for redundancy (and to increase available bandwidth).
08-27-2012 07:48 AM
İ read somethings that said we can use LACP but the 1000 series can support this in gigbites interfaces! What mean that is it correct?
Sent from Cisco Technical Support iPhone App
08-27-2012 05:50 PM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Don't know about the 1000 series.
For other ISRs, see: http://www.cisco.com/en/US/prod/collateral/routers/ps5855/prod_white_paper0900aecd806f698a.pdf
08-28-2012 12:24 AM
Excuse me its 10000 series!!
İ read it: how to configure gigabit ethernet port channels using LACP. İt allows you to bundle multiple gigabit ethernet links into a single logical interface on a cisco 10000 series router.
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide