03-10-2011 08:42 AM - edited 03-06-2019 04:01 PM
Hi All,
I would like to reload my FWSM configured in failover mode, the switch is in VSS mode. Is the command "hw-module module # reset" will reload the two pair FWSM or only the active one? thanks in advance!
cheers!
reymon
Solved! Go to Solution.
03-10-2011 01:45 PM
03-10-2011 09:30 AM
Hi,
For VSS, add switch 1 to the command if you want to reset the module in switch 1
hw-module switch 1 module 6 ?
HTH
Reza
03-10-2011 09:38 AM
Hi Reza,
Many thanks on the quick response. Sorry I forgot to mention on my first post that I want to reload the two fwsm in the VSS mode.
Is the "hw-module module 6 reset" the right command to do this?
Thanks again,
cheers!
reymon
03-10-2011 01:45 PM
Hi Reymon,
Yes, that should do it
Reza
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide