Remote Stack Cisco C9300-24s

[gespanos]

Hello, 

I found that Cisco has a feature called StackWise-Virtual.  
I tried to configure StackWise-Virtual in C9300,
but an error occurs when I configure the interface:

Switch(config)#int tenGigabitEthernet 1/1/1

Switch(config-if)#stackwise-virtual link 1
Distributed Stack Config is not allowed on Provisioned Switch/Line Cards.

Is there any solution for Remote Stack in C9300 ? 

Thanks!

[balaji.bandi · Accepted solution]

I do not believe Cat 9300 support stackwise-virtual

Cat 9300  only support traditionla stacking config.

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9000/nb-06-cat-9k-stack-wp-cte-en.html

[gespanos]

Yes you are right. 

It seems that only stack cables is acceptable for the stacking mode. 

Thanks a lot !