% Remove layer 3 binding first

[Shannon Sutter]

Hi,

I'm trying to remove "no pri-group timeslots 1-24 service mgcp" on a Controller T1 from a 2621MX Router IOS 12.3(11)T and i'm getting "% Remove layer 3 binding first". I can't really remember how to do this. If you guys knows the steps please let me know.

This is the Controller T1 config

controller T1 1/0

shutdown

framing esf

linecode b8zs

pri-group timeslots 1-24 service mgcp

Thank you,

Zeek

[Pari Thiagasundaram]

Try this:

int s0/0/1:23

3825-A(config-if)#no isdn bind-l3 ccm-manager

3825-A(config-if)#contr t1 0/0/0

3825-A(config-controller)#no pri

3825-A(config-controller)#

[Shannon Sutter]

It works!

Thank you,

Zeek

[AlejoSan]

Hi,

In controllers E1 it is the same procedure:

RT(config)#interface serial 0/0/0:15

RT(config-if)#no isdn bind-l3 ccm-manager

RT(config-if)#exi

RT(config)#controller E1 0/0/0

RT(config-controller)#no pri-group timeslots 1-31 service mgcp

RT(config-controller)#end

Thanks

Regards