Hi.
I'm replacing a bad switch in our 3850 stack. It's switch 3 and as far as I can see has the correct software version but I get this error:
V-Mismatch.
New switch -
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 3 56 WS-C3850-48P 03.03.01SE cat3k_caa-universalk9 INSTALL
Current Stack -
3 56 WS-C3850-48P 03.03.01.SE cat3k_caa-universalk9 BUNDLE
Can anyone help?
Thank you,
Thomas