Restore CISCO881-SEC-K9 factory startup config

[Stephen Wyndham]

I messed up  the IOS on the flash of CISCO881-SEC-K9. On reboot it booted to ROMMON which allowed me to tftp up a working IOS c880data-universalk9-mz.151-4.M3.bin. Unfortunately somewhere in my playing around the default startup configuration factory loaded on the routerhas been erased. I can load a new a config on the device but as I'm using the router to learn its helpful to have the original config load when I factory reset the device. Can anyone post the factory start up config?

Also I list of the files in the flash: directory for factory would be helpful to

thanks

SW       

[paolo bevilacqua]

A quick search would have shown to you: 'write erase' and reload.

However there is nothing to learn from the default configuration, beside the fact that it doesn't do anything.

[Stephen Wyndham]

Paolo thanks for your insight but if it was that simple I wouldn't have posted. I've tried a write erase and the reset button on the back off the router but it doesn't restore the config as shipped from the factory, which is why I asked if some one could posted it. Also I requested a list of the files is ships with in Flash.

[Leo Laohoo]

Also I requested a list of the files is ships with in Flash.

The only important thing you need is the IOS.  The rest are only for SDM.