06-26-2013 11:40 PM - edited 03-07-2019 02:06 PM
Hi all
I have taken the preempt command deom my switch 1 of out my vss pair.
Switch 2 is now the active vss switch.
what does this really mean? what does the active vss role do ?
cheers
Carl
Solved! Go to Solution.
06-26-2013 11:59 PM
Carl,
When you create or restart a VSS, the peer chassis negotiate their roles. One chassis becomes the VSS active chassis, and the other chassis becomes the VSS standby.
The VSS active chassis controls the VSS. It runs the Layer 2 and Layer 3 control protocols for the switching modules on both chassis. The VSS active chassis also provides management functions for the VSS, such as module online insertion and removal (OIR) and the console interface.
The VSS active and VSS standby chassis perform packet forwarding for ingress data traffic on their locally hosted interfaces. However, the VSS standby chassis sends all control traffic to the VSS active chassis for processing.
Complete infomration can be obtain from below ref:
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/vss.html
HTH
Regards
Inayath
*Plz rate all usefull posts.
06-26-2013 11:59 PM
Carl,
When you create or restart a VSS, the peer chassis negotiate their roles. One chassis becomes the VSS active chassis, and the other chassis becomes the VSS standby.
The VSS active chassis controls the VSS. It runs the Layer 2 and Layer 3 control protocols for the switching modules on both chassis. The VSS active chassis also provides management functions for the VSS, such as module online insertion and removal (OIR) and the console interface.
The VSS active and VSS standby chassis perform packet forwarding for ingress data traffic on their locally hosted interfaces. However, the VSS standby chassis sends all control traffic to the VSS active chassis for processing.
Complete infomration can be obtain from below ref:
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/vss.html
HTH
Regards
Inayath
*Plz rate all usefull posts.
06-27-2013 12:28 AM
bascially, does the active VSS switch have to be the chassis with the active supervisor card on it ?
06-27-2013 05:49 AM
Carl,
The answer to your question is YES.
REgards
Inayath
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide