ROUTE_MAP CONFIGURATIONE ISSUE

[Luigi Gnerre]

Hello,

i have a Cisco Switch C3560 whit IOS c3560e-universalk9npe-mz.150-2.SE5 but the command

RMTRC40S(config-if)# ip policy route-map PBR_for_proxy

                         ^

% Invalid input detected at '^' marker.

and

RMTRC40S(config)#ip vrf VAS

                     ^

% Invalid input detected at '^' marker.

are deprecated.

What is the alternative solution for this configuration issue

[marce1000 · Accepted solution]

                        - Ref :https://support.hpe.com/hpesc/public/docDisplay?docId=c02278360&docLocale=en_US
   >...The IP Services license provides a richer set of enterprise-class features, including advanced hardware-based IPv6 unicast and IPv6 Multicast routing as well as policy-based routing (PBR).

 M.

[MHM Cisco World · Accepted solution]

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3560/software/release/12-2_52_se/configuration/guide/3560scg/swsdm.html

also check SDM.