cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
923
Views
0
Helpful
2
Replies

route-maps on 3750

Richard Venn
Level 1
Level 1

Hello,

I am using route-maps on a 3750 to forward traffic to a specific next-hop. I would like to use "set ip next-hop recursive a.b.c.d" as the next hop is not a local network.

However the feature navigator shows this as unsupported command on 3750's.

Can anyone confirm this as I am unable to try this command as the switch is in a live network?

Cheers

Richard

1 Accepted Solution

Accepted Solutions

spremkumar
Level 9
Level 9

Hi Richard

I feel if its mentioned not supported in Feature Navigator i dont think you will be able to go with that command..

But did you try checking up the command reference guide of the ios installed in your box..

http://www.cisco.com/en/US/products/hw/switches/ps5023/prod_command_reference_list.html

regds

View solution in original post

2 Replies 2

spremkumar
Level 9
Level 9

Hi Richard

I feel if its mentioned not supported in Feature Navigator i dont think you will be able to go with that command..

But did you try checking up the command reference guide of the ios installed in your box..

http://www.cisco.com/en/US/products/hw/switches/ps5023/prod_command_reference_list.html

regds

Hello,

Many thanks for the guide. I had got round to checking and its not there.

Cheers

Richard

Review Cisco Networking for a $25 gift card