04-01-2013 05:05 AM - edited 03-07-2019 12:33 PM
Hi
i am using 2821 router with (C2800NM-IPBASE-M), Version 12.4(3i),
I want to enable the BGP , but the Version of this IOS not supporting ,,
advice me and how to do it
Solved! Go to Solution.
04-01-2013 05:30 AM
Hello Mohan,
Your image doesn't show any support for BGP. If you want to stick to this train of images you need to upgrade to either of these:
Or alternatively use an image listed in the attachment in previous post.
I hope this helps.
Please rate useful posts and remember to mark any solved questions as answered. Thank you.
04-01-2013 05:36 AM
You have 2 options that will allow you to run BGP on this router.
1) you can upgrade the IOS to a more recent version of IP Base. Cisco made changes in the content of IP Base and in recent versions BGP is included in IP Base. If you have a maintenance contract for this router then the upgrade of version should be covered.
2) you can purchase a feature upgrade license to allow you to upgrade to a different feature set which would include BGP.
HTH
Rick
04-01-2013 05:15 AM
Hello,
Could you tell us the full image name please.
Thank you...
You can use the cisco feature navigator to find out: http://tools.cisco.com/ITDIT/CFN/
Attached is a spreadsheet of all IOS images that support BGP for your platform.
Please rate useful posts and remember to mark any solved questions as answered. Thank you.
04-01-2013 05:24 AM
Bilal
Image : c2800nm-ipbase-mz.124-3i.bin
04-01-2013 05:30 AM
Hello Mohan,
Your image doesn't show any support for BGP. If you want to stick to this train of images you need to upgrade to either of these:
Or alternatively use an image listed in the attachment in previous post.
I hope this helps.
Please rate useful posts and remember to mark any solved questions as answered. Thank you.
04-01-2013 05:36 AM
You have 2 options that will allow you to run BGP on this router.
1) you can upgrade the IOS to a more recent version of IP Base. Cisco made changes in the content of IP Base and in recent versions BGP is included in IP Base. If you have a maintenance contract for this router then the upgrade of version should be covered.
2) you can purchase a feature upgrade license to allow you to upgrade to a different feature set which would include BGP.
HTH
Rick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide